The Best Weight Plates to Max Out Your Strength Training

Featuring a thinner profile than other bumper plates, the Milspec bumper from Fringe Sport features a durable stainless steel collar for added reinforcement. Virgin rubber is used in manufacturing, which helps eliminate that "old tire" smell. Additionally, these weight plates offer low bounce, which is great for those in tight spaces — the bar won't hop around when dropped.

Just be sure to wipe these impressive weight plates down with soap, water and a paper towel when unboxed, as they're greased during the manufacturing process. Once wiped down, however, these weight plates can help you power through the most intense workouts — inside and outdoors.

Eleiko makes some of the highest quality strength equipment, and these training plates continue the brand's legacy without question. A lipped edge helps make loading the barbell easier, and the rubber is vulcanized to the metal hub for added durability.

Eleiko’s sport training plates are available in weights ranging 25–55 lbs, all colored to match competition standards. While the price is definitely expensive — a pair of 45-pound plates can cost close to $500 — these workout essentials carry the same high standards present in the entire Eleiko lineup.

I’ve used Fitness Gear’s Olympic Cast Plates in multiple settings and always found these dishes to be a great cost-effective option for budding home gym enthusiasts. The cast iron construction is plenty durable for most needs, and I also appreciate the convenient grip handles that make adding or removing weight much easier on the hands.

The Olympic construction of these Fitness Gear plates also means they can fit most standard barbells, but because of the lower cost, the sizing may be less accurate than others on this list. For example, some athletes have noted a slight gap between sleeve and plate, which can lead to some clang-filled sessions at times. Plus, these plates are only sold individually, so remember to add two to your cart if you want a pair of 45s.

These weight plates aren’t the flashiest, but I find the colored lettering across Rep Fitness’s Sport Bumper Plates to be the perfect amount of flair for any weight room. The palette is consistent with competition standards while still having enough of that black base to promote a more hard-nosed workout vibe.

Looks aside, I also appreciate how low bounce these plates are, along with their low noise that generates up to 10 percent fewer decibels than other bumpers when dropped. Just be sure to have the right amount of weight on the bar before a lift, as the lack of a defined lip makes these dishes somewhat of a pain to unload at times.

Editor’s Note: If you’re more of the vibrant athlete and want your plates to have as much personality as you do, I recommend the Animal Print Series from Rep Fitness for a wild workout experience.

Made from high durometer urethane, these weight plates from Vulcan offer up exceptional rigidity and durability in a streamlined profile. Urethane is harder than rubber, which means these plates can be dropped and used throughout your entire fitness journey with minimal wear and tear, all without the traditional rubber odor.

The Prime Bumper Plates are also color-coded for easier identification, and feature beveled edges and a raised lip. These two qualities make sliding the plates on and off between sets much easier. And if you’re looking to keep that “good-as-new” aesthetic, the urethane construction can better maintain color and appearance than other options on this list.

While the Sport Bumper Plates are one of the more stylish options available, Rep Fitness also makes my favorite rubber weight plate. No frills. No flash. Just a solid weight plate that packs in a ton of durability without the glitz and glamor.

At less than three inches thick, these 45-pound plates can be loaded onto a standard olympic barbell for up to 515 pounds, which should be more than enough for the casual enthusiast. A stainless steel insert improves rigidity, while the virgin rubber construction provides a dead bounce that’s perfect for cramped garage lifts. As with most rubber plates, though, you can experience some lingering smells with new weights. In my experience, though, it will eventually dissipate over extended use.

While cast-iron plates are traditionally cheaper than bumper plates, that doesn’t mean they lack in terms of quality. The Olympic Iron barbell plates from The Strength Co. boast a deep lip around the edge for easier gripping and transport. Plus, I really like the coated exterior that gives the plates a little grit when racking — and an added boost in the style department.

At just 1.25 inches thick, these plates take up minimal space along the barbell sleeve, too, so you can max out your bench, squat and deadlift to however high you desire. In addition, The Olympic Iron barbell plate is also available in 100-pound increments, which is a rare occurrence that saves space — and money — when budgeting out your weight setup.

Calibrated plates can be a great way to ensure your totals are as accurate as possible, and for those that lift competitively, having a set to train with at home can make reaching the podium a much more approachable goal. I really like the Calibrated Steel Plates from Titan Fitness due to their thin profile that allows for more room on the sleeve and keeps the weight more focused at the center of your frame.

Additionally, the back of each plate includes calibration plugs for greater precision within a 10-gram tolerance of weight, which means your lifted totals can be as accurate as possible for better peace of mind. While adjusting to the metric weight scale might take some time — or, at least a convenient calculator nearby — these plates can be the perfect way to take your training from hobby to competitive sport in no time.

If you want to train like you’re really on the Olympic stage, then these are the plates for you. Competition plates from Eleiko are trusted by both the International Weightlifting Federation and International Powerlifting Federation for their gold-standard quality, precision and durability.

A patented ImpactDISC distributes impact force more evenly, while zinced steel hubs ensure exceptional rigidity and longevity. A thinner profile allows for more weight to be added to the bar, too, so chasing those lifting records just got a little easier — from a space standpoint, at least. The price is steep, but so is the quality.

Having a handle cut-out on your weight plates can make toting your dishes from rack to bar much easier, and I’ve really enjoyed the silhouette of the 12-Sided Urethane Plates from Rogue Fitness. Not only do the recessed handles make loading up a barbell much easier, the profile features a dodecagon shape, meaning there’s little roll when you drop a bar or rest it on the platform between sets.

According to Rogue, the polyurethane coating is at least 3mm thick, meaning there’s enough protection around the cast-iron base to ensure better durability for years of use. I will say, however, that it pays to wipe your hands before grabbing hold of these plates. The poly coating can get a little slippery at times — something you don’t want to find out when suspending a 45-pound plate over your toes.

When you embark on a strength training program, every little improvement counts. But your PR won’t always jump by 10, 25 or 45 pounds, which is where change plates can help. These plates from EveryMate come in pairs of 5, 2.5 and 1.25 discs, allowing you to continuously progress your totals without strain.

The rubber-coated plates are exceptionally durable and are color coded according to competition standards. A two-inch opening allows these change plates to be easily added to any barbell, too, so you can gradually chase your goals while still getting in an effective session.

Unless you have a deadlift jack or wedge, setting up a barbell for deadlifts can be a bit of a chore, since the weights all sit uniform on the ground. Thanks to the larger diameter of the Titan Fitness Wagon Wheel Pulling Blocks, that strain is eliminated — the bar sits higher off the ground, so adding 45s and other plates is much easier.

I like lifting with these wagon wheel plates because they allow for easier partial range of motion deadlifts without the need for extra blocks or setups. Plus, that clanging sound can easily get the juices flowing as you begin to climb into heavier totals. While the wagon wheel’s effectiveness is less pronounced with other lifting modalities, for serious deadlifters, these are a must-own.